Coatings for Industrial, Commercial and Municipal Applications

Revolution Industrial offers shop and field based coatings services. Shop related coatings services include a 22,000 square foot shop and experience with a variety of coating systems in the industrial and commercial coating fields. Shop and Field capabilities include work in the following areas.

Don Marmon / Coating Division Manager
At the heart of the Revolution Industrial Coating Division is Don Marmon, it’s Coatings Managing Partner. Don has managed crews for more than 35 years in Blasting and Coating Applications for Power Plants, WWTP, WTP, Industrial and Commercial facilities, Municipal Tanks, and secondary containments. Utilizing his solid leadership and management style, Don developed training workshops to give painters and applicators the skill sets required when working with Acrylics, Epoxies, Polyurethanes, Zincs, Coal Tars, Alkyds Polyureas, Hybrids and other industrial, commercial and municipal coating systems. More notable projects Don has managed are:

Scottsdale Water Campus
Managed Crew of 50+, $3,200,000, Coating Project. (McCarthy Co.)

CAP in Scottsdale
Managed Crew of 25+, $1,300,000 painting project. (McCarthy Co.)

City of Phoenix – 24th Avenue Recycling Plant
Managed Crew of 25+, $925,000 blasted and coating all the exterior buildings.

City of Phoenix – 91st Avenue WWTP
Managed Crew of 25+, $2,400,000 3 mg. tank $500.000 new tank blasting and coating. (McCarthy Co.)

RIC-Logo-Stacked

Industrial Applications
• Facility Rehabs
• Process Equipment Coating
• Piping Systems Coating (ID&OD)
• Power facilities (Tanks, Boiler Blasting, Platforms, Containment)
• Plural Component systems
Municipal Applications
• Wastewater Treatment Plants
• Water Treatment Plants (Potable)
• Pump Stations
• Tank Rehabs (ladders, vents, rafters, floors, overflows
• New Tank Coatings
Commercial Applications
• Exterior Buildings
• Interior Buildings ( Rafters, Sprinkler Piping, Structures)
• Structural Steel
• Roof Coating Systems

Coating  Manufacturers  Used

• PPG
• Carboline
• Sherwin Williams
• Tnemec
• Ameron
• Devoe
• International Paints
• Ceilcote
• General Polymers
• Rainguard
• Sauereisen
• Sika

Large-AWWA-Job

Case Study:


Fuel Depot – Marana Farm / Tank Rehab

Customer requested to blast, prime and finish coat four fuel tanks at existing large farm. Tanks were older tanks and needed to be re-coated. The tanks were blasted to SSPC-14, primed with epoxy at 4-6 mils and finish coated at 3-5 mils of polyurethane. This work included coating a new 50,000 gallon potable water tank. This tank was blasted to SSPC-6 exterior with a SSPC-10 on the interior. Tank was then coated with (2) coats with NSF approved epoxy coating on the interior. Exterior was coated with 4-6 mils of epoxy and 3-5 mils polyurethane finish coat.